Our Services
Commercial kitchen exhaust, HVAC systems, and fire suppression — all from one certified team across the GTA.
Commercial Kitchen
Complete design, installation, and maintenance of commercial kitchen
exhaust systems — built to code for every type of kitchen, big or small.
Commercial Kitchen Exhaust System
Complete design, installation, and maintenance of commercial kitchen exhaust systems built to NFPA 96 for kitchens of all sizes and cooking volumes.
Commercial Kitchen Hood
Supply and installation of Type I and Type II commercial kitchen hoods engineered to capture smoke, grease, steam, and heat from all cooking equipment.
Commercial Exhaust Fan
High-performance rooftop and inline exhaust fans sized precisely for your kitchen’s airflow needs — from installation to repair and replacement.
Commercial Duct Work
Custom fabricated and installed galvanized or stainless steel ductwork designed for heavy grease loads, efficient airflow, and long-term code compliance.
Ecology Unit
Grease and odour elimination systems using electrostatic precipitators and carbon filters — ideal for urban locations, plazas, and sensitive environments.
Make Up Air / Fresh Air
Balanced fresh air supply systems that replace exhausted air, maintain comfortable kitchen temperatures, and prevent negative pressure build-up.
Commercial Kitchen Exhaust System
Complete design, installation, and maintenance of commercial kitchen exhaust systems built to NFPA 96 for kitchens of all sizes and cooking volumes.
What’s included
- Full system design tailored to your kitchen layout
- Professional installation by certified technicians
- Code compliance inspection and sign-off
- Ongoing maintenance and service contracts
Commercial Kitchen Hood
Supply and installation of Type I and Type II commercial kitchen hoods engineered to capture smoke, grease, steam, and heat from all cooking equipment.
What’s included
- Type I (grease) and Type II (heat/steam) hoods
- Custom sizing for any kitchen footprint
- Stainless steel construction, grease filter included
- Meets fire code and building inspection requirements
Commercial Exhaust Fan
High-performance rooftop and inline exhaust fans sized precisely for your kitchen’s airflow needs — from installation to repair and replacement.
What’s included
- CFM calculations and proper fan sizing
- Rooftop, upblast, and inline fan installation
- Belt, motor, and bearing repair or replacement
- Same-day emergency service available
Commercial Duct Work
Custom fabricated and installed galvanized or stainless steel ductwork designed for heavy grease loads, efficient airflow, and long-term code compliance.
What’s included
- Grease duct fabrication in galvanized or stainless steel
- Clearance-to-combustible and fire wrap installation
- Access panels for cleaning compliance
- NFPA 96 compliant routing and installation
Ecology Unit
Grease and odour elimination systems using electrostatic precipitators and carbon filters — ideal for urban locations, plazas, and sensitive environments.
What’s included
- Electrostatic precipitator selection and sizing
- Carbon filter and UV system integration
- Grease capture before it exits the building
- Maintenance and filter replacement programs
Make Up Air / Fresh Air
Balanced fresh air supply systems that replace exhausted air, maintain comfortable kitchen temperatures, and prevent negative pressure build-up.
What’s included
- Airflow balancing calculations and design
- Direct-fired and indirect-fired MUA units
- Tempered air in winter for staff comfort
- Coordinated with exhaust system for full balance
HVAC
Heating, ventilation, and cooling systems for commercial buildings — installed and maintained by fully certified HVAC technicians across the GTA.
Furnace
Commercial furnace installation, replacement, and maintenance for restaurants, retail units, and office spaces. High-efficiency units sized for your building’s heating load.
Gas Line
Certified gas line installation, modification, and repair for commercial cooking equipment, furnaces, and water heaters — completed safely to local Enbridge and code requirements.
HVAC Duct Work
Design and installation of supply, return, and exhaust ductwork for heating and cooling systems — properly sized and sealed for maximum energy efficiency.
AC / Cooling
Commercial air conditioning installation, maintenance, and repair for restaurants and commercial spaces — rooftop units, split systems, and VRF solutions.
Furnace
Commercial furnace installation, replacement, and maintenance for restaurants, retail units, and office spaces. High-efficiency units sized for your building’s heating load.
What’s included
- Heating load calculation and unit selection
- Gas furnace installation and commissioning
- Annual maintenance and filter service
- Emergency repair and replacement service
Gas Line
Certified gas line installation, modification, and repair for commercial cooking equipment, furnaces, and water heaters — completed safely to local Enbridge and code requirements.
What’s included
- New gas line runs for cooking equipment
- Gas meter upgrades and capacity increases
- Leak testing and pressure testing
- Enbridge inspection coordination and permits
HVAC Duct Work
Design and installation of supply, return, and exhaust ductwork for heating and cooling systems — properly sized and sealed for maximum energy efficiency.
What’s included
- Manual D duct design for balanced airflow
- Sheet metal and flexible duct installation
- Insulation and air sealing for energy savings
- System balancing and airflow verification
AC / Cooling
Commercial air conditioning installation, maintenance, and repair for restaurants and commercial spaces — rooftop units, split systems, and VRF solutions.
What’s included
- Cooling load calculation and system selection
- RTU, split, and mini-split system installation
- Refrigerant handling by certified technicians
- Seasonal maintenance contracts available
Fire Suppression
UL-listed fire suppression systems installed, inspected, and serviced by certified technicians. Required by NFPA 96 for every commercial kitchen in Ontario.
Official Partnership
Authorized Distributor of Two Industry-Leading Brands
CBMS Inc. is an authorized distributor of Buckeye Fire Equipment and Protex II — the gold standard for commercial kitchen fire suppression in North America. Every installation uses genuine manufacturer parts, backed by full warranty.
Install Fire Suppression System
Complete installation of UL-listed wet chemical fire suppression systems — Buckeye Kitchen Mister™ or Protex II — sized and configured for your specific kitchen equipment layout.
Inspection Semi / Annual
Mandatory semi-annual fire suppression inspections required by Ontario Fire Code. We test, recharge, tag, and certify your system — so your insurance and permits stay valid.
Repair
Fast, reliable repair of existing fire suppression systems — whether accidental discharge, component failure, or post-inspection deficiencies. We use genuine manufacturer parts for all repairs.
Install Fire Suppression System
Complete installation of UL-listed wet chemical fire suppression systems — Buckeye Kitchen Mister™ or Protex II — sized and configured for your specific kitchen equipment layout.
What’s included
- Site assessment and system design to NFPA 96
- Buckeye Fire or Protex II system — your choice
- Automatic gas line shut-off valve integration
- Fire code inspection and certificate of completion
- Manufacturer-backed warranty on all parts
Inspection Semi / Annual
Mandatory semi-annual fire suppression inspections required by Ontario Fire Code. We test, recharge, tag, and certify your system — so your insurance and permits stay valid.
What’s included
- Full system test per NFPA 96 and UL-300 standards
- Fusible link and detection system inspection
- Nozzle check and chrome cap replacement
- Agent pressure gauge verification
- Signed inspection report and system tag issued
Repair
Fast, reliable repair of existing fire suppression systems — whether accidental discharge, component failure, or post-inspection deficiencies. We use genuine manufacturer parts for all repairs.
What’s included
- System diagnosis and failure identification
- Post-discharge recharge and system reset
- Control head, valve, and nozzle replacement
- Gas valve repair and ansul agent recharge
- Genuine Buckeye & Protex II replacement parts
Semi-annual inspection is required by Ontario Fire Code
Missing an inspection can void your insurance and result in failed health inspections. Book yours today.
Why CBMS
One Company. All Three Trades.
Licensed & Certified
All technicians are fully licensed and trained on Buckeye Fire and Protex II systems — manufacturer-certified installations.
98% First-Pass Rate
Our installations pass fire and building inspections on the first visit — saving you time, delays, and re-inspection fees.
24h Emergency Service
Ventilation or fire suppression issues can’t wait. We offer rapid response across the GTA for urgent service calls.
200+ Projects Completed
Trusted by KFC, Burger King, Pizza Hut, and hundreds of independent restaurants throughout the GTA region.